Controller Compatible with Automotive Motorcycle Parts For Air65 Tiny Whoops Drone RC Airplane Brushless Motors (1-2S AM32 ESC)

1PCS 1-2S 20A AM32 ESC 32-bit Electronic Speed Controller for Air65 Tiny Whoops Drone RC Airplane Brushless Motors Brushless ESC (Electronic Speed Controller) with a compact size designed for installation in small spaces. Compatible with 1-2S batteries and supports a continuous output current of up to 20A.Features low-power MOSFETs arranged on the same side of the board to facilitate heat dissipation. Suitable for powering small brushless motors in model aircraft. Supports control signals including DSHOT and PWM, providing linear response at low speeds and stable performance at higher speeds with smooth throttle control.Based on AM32 open-source firmware, allowing customizable settings.Supports bidirectional, adjustable braking behavior, sine boot and smooth forward reverse shifting. Built with a double PCB stacking design. The power board uses a 4-layer 2oz immersion process to ensure efficient -current transmission. Manufactured using professional SMT assembly methods for consistent build quality. The ESC requires use with a parameter controller for configuration.Connection steps: connect the ESC's 3-pin plug to the regulator with the wire (white) to S and ground wire (black) to G.Connect the regulator to a computer via USB (Type-C), power supply to the ESC with a , then run the Esc_Config_Tool_1.82 software. Ensure that the serial port driver is recognized (e.g. CH340 device appears in Device Manager).Launch SerialPortConnector.exe, select the appropriate COM port, click Connect, and then go to the M1 interface to start adjusting parameters.After adjustments, save the settings before disconnecting. Package can contain 1 piece AM32 ESC or 1 piece parameter controller, depending on the selection. Compatibility Disclaimer: This is an aftermarket replacement part. All…