MAKA 5-in-1 Pipe Finder and Moisture Meter - Multifunctional wall scanner detector for wood/metal/AC wire with audible warning - Moisture detection in wood/construction

Product Description Do you want to make sure that you drill in the right place in your wall and do not hit electrical pipes? Or are you looking for the moisture content of your wood or walls? Then the MAKA 5 in 1 multidetector (MKLD01) is the perfect tool for you! One tool with all functions One tool with all functions By incorporating the five functions into one device, you have more space in your toolbox and save money. This multidetector combines the capabilities of the MKLW01 moisture meter and the MK10 pipe finder, for a total of over 15 euros less. Optimal scanning depth Optimal scanning depth An optimal scanning depth is important so that despite scanning, you do not still drill in, for example, a water pipe that is just a little deeper than your scan range. This will not happen with the MAKA multidetector. The scanner of has a range of: 120 mm metal (such as concrete reinforcement)80 mm copper pipes (such as water pipes)50 mm power wires (with voltage)38 mm wood (such as rachelwork under for example your drywall) Moisture measurement Moisture measurement In addition to the extensive functions as a pipe finder, the 5 in 1 multidetector also has a moisture meter. You can easily measure the moisture content in wood and building materials such as concrete and stucco. You simply do this by switching to the moisture meter mode and inserting the two electrodes into the material to be measured. Battery life and display Battery life and display Of course, the 5 in 1 multidetector also features a backlit LCD screen and a hold function for moisture measurement. For example, you can perform the moisture measurement, press the hold button and remove the device from the surface to be measured to take over the measured value. All this works on one 9 volt battery, which of…