Eurotec Wood construction screw Paneltwistec with head, galvanized 10x100 - 50 Stück

Eurotec wood construction screw Paneltwistec with flat head: steel, slightly galvanized Also for fixing spruce insulation. Insulation thickness up to 300 mm. ETA approval: ETA-11/0024 approval Z-9.1-661 architectural approval torx/T-drive/I-star size and quantity above freely selectable corrosion protection: blue+ is an innovative coating system with higher corrosion resistance than conventional galvanic galvanized surfaces. With the blue+ system, a seal is applied to a galvanized surface that reacts with it. Thus, even any weak spots of the galvanized are securely enclosed and protected. The coating is free of chromium (VI) oxide, which is considered hazardous to the environment, among other things. Surfaces treated with blue+ have good resistance to mechanical stress. Advantages blue + coating: higher corrosion resistance than conventional galvanisation can be used in use classes 1 and 2 free of chrome (VI) oxide Resistant to mechanical stress screw point AG: due to the special geometry of the screw tip AG, the screw-in torque is greatly reduced, i.e. the screw is easier to screw in. In contrast to conventional screw tips, this leads to a lower splitting effect when screwed in. Advantages screw point AG: faster and easier screwing in, less splitting effect. Approved advantage plate head: Thanks to the large head diameter, significantly higher pull and head pull values are achieved. The tensile force of the screw is thus better utilized.