JMT ADT-K43SG-BK PCIe 5.0 X16 to M.2 NVMe Graphics Card Adapter Compatible with RTX50 RX90 Series Docking Station (K43SG-BK-50cm)

JMT ADT-K43SG-BK PCIe 5.0 X16 to M.2 NVMe Graphics Card Adapter Compatible with RTX50 RX90 Series Docking Station Two switches on ADT K3G: SW1: Power Force Start Switch. 1 = Auto-Start, 2 = Force Start. Set to 1 for automatic start. SW2: Some older graphics cards from 5 years ago do not support CLKREQ signals. If the CLKREQ indicator light does not light up, simply turn on the SW2 micro switch to 2. No BIOS configuration is required, which improves compatibility and convenience. Compatibility: Supports almost all PCIe graphics cards released in the last three years. Make sure the latest official drivers are installed. If a yellow exclamation mark appears, reinstall the drivers and restart the computer. If the yellow exclamation mark persists (error code 43 or code 12), refer to the troubleshooting methods of international experts. Use notes: 1. Always check the orientation of the cable before inserting to avoid reverse or misaligned connections, which may damage equipment. Before inserting cables, attach the connector of the device to prevent pins from breaking due to excessive force. Do not bend or pull the cable within 2 cm of the solder joints at both ends. 2. Signal transmission capabilities vary between different motherboards and devices. Signal degradation occurs when an extension cable is used. 3. Graphics cards and motherboards are electronic components that degrade and oxidize over time. Using an extension cable further compromises stabilityThis method is not recommended for devices older than three years