5V Active PoE Splitter 2.5mm x 0.7mm for Reolink E1 (V2), E1 Pro, E1 Zoom, Lumus V2 & Pro, 5V 2.4A Output, Supports 44-57V IEEE 802.3af/at/bt PoE Switches

Overview This active PoE splitter is designed to connect non-PoE devices to PoE infrastructure, converting 44-57V PoE input from PoE switches into an accurate 5V 2.4A output through a 2.5mm x 0.7mm DC connector. Allows non-PoE devices to be powered via standard Ethernet cables, eliminating the need for separate power adapters and simplifying wiring. Compatibility and functionality Tailor-made for Reolink camera models: Reolink E1 (V2), E1 Pro, E1 Zoom: Provides both power and data, providing a more stable wired Ethernet connection compared to Wi-Fi. Reolink E1 (V1), Lumus (V2/Pro): provides power only, where the camera connects to the network via Wi-Fi. *Important note: Not compatible with Reolink Lumus V1 (fixed cable version) or 12V devices. * Technical specifications Input voltage: 44-57V DC (IEEE 802.3af/at/bt) via RJ45 port Output voltage: DC 5V 2.4A (middle positive) Connector type: 2.5mm (outer diameter) x 0.7mm (inner diameter) male plug Data transfer: 10/100 Mbps Insulation protection: 2.5 kV Power pin configurations: 1/2(+/-), 3/6(-/+) and 4/5(+), 7/8(-) LED indicator: yellow LED (power enabled); green LED (idle by design) Dimensions: 80mm x 27mm x 22mm Cable length: approx. 160 mm (total) Operating temperature: -20°C to 45°C Tips for use This splitter is intended for 5V devices only – do not use with 12V equipment. If you are using a managed PoE switch (e.g. HP 3500 Series) and the camera cannot connect, manually set the switch port speed to 100Mbps for optimal performance. Package includes 1 x 5V Active PoE Splitter (2.5 x 0.7mm Plug)