AXAGON RSS-M2SD SATA - M.2 SSD SATA, up to 80mm SSD, ALU body, silver *SATAM *M.2

Internal 2.5" box AXAGON RSS-M2SD with SATA interface is designed for SATA M.2 SSDs. The SATA 6G interface will allow the user to enjoy modern M.2 SSDs with a bit rate of up to 6Gb/s. In addition, the internal M.2 box supports other modern functionalities, e.g. TRIM. In the box, SATA M.2 SSDs with a size up to 22x80 mm can be mounted. The box does not limit SSD capacity, and inserted M.2 SSD cards may be of both one-sided and double-sided types. In the operating system, in BIOS (UEFI) and during booting, the internal box with inserted M.2 card behaves like a standard hard disk. This reduction features both appearance and dimensions of a standard SDD. By inserting the M.2 SSD in the reduction you will easily create a very fast internal 2.5" disk. Input: • SATA 6G (SATA III) interface, compatible with SATA 3G (SATA II) and SATA 1.5G (SATA I). • 22-pin (7+15) SATA data and power supply male connector to connect the box with the motherboard. • To achieve the best possible bit rates, the use of a SATA 6G controller is recommended. Device support: • SATA M.2 SSDs. • designed for B+M-key and B-key card formats, • NGFF 75-pin B-key slot for SATA M.2 drives. Other features: • Support of B+M-key or B-key SATA (AHCI) M.2 SSDs without maximum capacity limitation. • Support of M.2 drives with a size of 2230, 2242, 2260, and 2280 mm. • Support of both one-sided and double-sided M.2 SSDs. • Compliant with Serial ATA 3.1 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). • Compliant with Serial ATA 2.0 specification (SATA/300), transfer rates as high as 3 Gb/s (300 MB/s). • Compliant with Serial ATA 1.0 specification (SATA/150), bit rates of up to 1.5 Gb/s (150 MB/s). • Support of TRIM functionality to limit gradual degradation of the SSD performance over time. • SSD/HDD…