Ubiquiti - UniFi nanoHD

Compact 802.11ac Wave2 MU-MIMO Enterprise Access Point. Deploy the UniFi nanoHD AP in high-densityenvironments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3af PoE compatibility. Environment: Indoor Simultaneous Dual-Band 2.4 GHz Radio Rate: 300 Mbps 2.4 GHz MIMO: 2x2 5 GHz Radio Rate: 1733 Mbps 5 GHz MIMO: 4x4 PoE Mode: 802.3af PoE Ceiling Mount Wall Mount Wireless Uplink DFS Certification Specifications UniFi nanoHD Dimensions: 160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29") Weight: 300 g (10.6 oz) With Mounting Kits: 315 g (11.1 oz) Networking Interface: (1) 10/100/1000 Ethernet Port Buttons: Reset Power Method: 802.3af PoE Power Supply: UniFi Switch (PoE) Power Save: Supported Beamforming: Supported Maximum Power Consumption: 10.5W Supported Voltage Range: 44 to 57VDC TX Power: - 2.4 GHz: 23 dBm - 5 GHz: 26 dBm MIMO: - 2.4 GHz: 2x2 - 5 GHz: 4x4 Radio Rates: - 2.4 GHz: 300 Mbps - 5 GHz: 1733 Mbps Antennas: - 2.4 GHz: (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each - 5 GHz: (2) Single-Port, Dual-Polarity Antennas, 3 dBi each Wi-Fi Standards: 802.11 a/b/g/n/r/k/v/ac/ac-wave2 Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF BSSID: 8 per Radio Mounting: Wall/Ceiling (Kits Included) Operating Temperature: -10 to 70 C (14 to 158 F) Operating Humidity: 5 to 95% Noncondensing Certifications: CE, FCC, IC Package Contents UniFi nanoHD AP, Mounting Bracket, Ceiling Backing Plate, Screws, Flat Head Screws, Keps Nuts, Screw Anchors, Gigabit PoE (48V, 0.5A) with Mount Bracket, Power Cord. Please note: PoE adapter + Power Cord are included only in the single-pack of the UAP-nanoHD!